EPI Home Page
About E-6000 Craft Epoxy Paste

arrows icon

What are the directions for using E-6000 Craft Epoxy Paste?
arrows icon Which substrates or materials does E-6000 Craft Epoxy Paste bond to?
arrows icon Is E-6000 Craft Epoxy Paste easy to use?
arrows icon What would I use E-6000 Craft Epoxy Paste for?
arrows icon Can E-6000 Craft Epoxy Paste be formed and sculpted to any shape?
arrows icon Is it possible to sand and paint E-6000 Epoxy Paste?
arrows icon Can I color E-6000 Epoxy Paste?
arrows icon How long does E-6000 Epoxy Paste take to dry?
arrows icon What are some suggested uses for E-6000 Epoxy Paste?
                                                            dividefr image
Directions:
  1. Clean area to be repaired. Remove all contaminates such as oil, grease, dirt, rust and paint.
  2. For best results, roughen surface with coarse sandpaper or file.
  3. Transfer equal portions of both sides to center mixing cup with two sticks provided. For more accurate measurement, divide each component in half and then transfer 1/2 portion to cup in center of tray.
  4. Stir and mix very thoroughly for 1-1/2 minutes. DO NOT attempt mixing on a flat surface! Always use a round container for mixing, so both sides can be blended thoroughly. DO NOT vary the 1 to 1 ratio for any reason.
  5. Once E-6000 Epoxy Paste is thoroughly mixed; you have approximately 5 minutes working time at 70° F to complete the project.
  6. At 70° F, allow approximately 20 minutes before sanding.
    SUGGESTIONS: After first batch is mixed and removed from mixing cup, wipe clean with paper towel and reuse for second batch.

For technical support, contact our Technical Service department by mail, email, or phone. Our office hours are 7:30 am - 4:00 pm (Central) Monday through Friday. Please contact us for more information.

To request a Material Safety Data Sheet (MSDS), please send an e-mail to msds@eclecticproducts.com.
                                                            divider image
Answers to E6000 Craft Expoxy Questions
Which substrates or materials does E-6000 Craft Epoxy Paste bond to?
E-6000 Craft Epoxy Paste forms a complete and permanent weatherproof bond to most all substrates & materials.
Is E-6000 Craft Epoxy Paste easy to use?
E-6000 Craft Epoxy Paste is convenient and easy to use. It comes with its own mixing cups and mixing sticks and each package includes a free project instruction sheet.
What would I use E-6000 Craft Epoxy Paste for?
E-6000 Craft Epoxy Paste is a thick, creamy, light gray epoxy filler, formulated to easily fill holes, gouges, cracks, splits, fractures, chipped surfaces and offer exceptional high impact resistance.
Can E-6000 Craft Epoxy Paste be formed and sculpted to any shape?
Yes. E-6000 Craft Epoxy Paste can be formed to any shape to replace damaged or missing pieces. E-6000 Craft Epoxy Paste will never shrink, crack or sag in the curing process.
Is it possible to sand and paint E-6000 Epoxy Paste?
Yes. Once cured, E-6000 Epoxy Paste can be sanded, ground, filled, tapped, sawed and will accept self-tapping screws and can be painted with most paints.
Can I color E-6000 Epoxy Paste?
Yes. To match E-6000 Epoxy Paste to surface, epoxy may be tinted with powder colorants, most water-based colorants and food dye.
How long does E-6000 Epoxy Paste take to dry?
You have approximately 5 minutes working time at 70°F to complete the project and will dry in 20 minutes. It even cures hard in wet environments and stays put-no slump or sag.

* Remember, temperature and humidity will affect dry time.
What are some suggested uses for E-6000 Epoxy Paste?
Here are a few of the ways that you can use E-6000 Epoxy Paste:
  • Repair ceramic and wood figurines.
  • Replaces pieces on broken mugs.
  • Assemble craft projects.
  • Repair patio and garden statues.
  • Patch cracks and splits in wood frames.
  • Rebuild broken corners.
  • Fill nail and screw holes.
  • Attach ceramic to wood; metal to concrete.