E6000 2floz Craft image

This product is available in several sizes: 0.50 fl oz, 1.0 fl oz, 2.0 fl oz and 3.7 fl oz carded tubes. Individual tubes are available in: 1.0 fl oz and 3.7 fl oz size.

Download PDFs:
Material Safety Data Sheet (MSDS)
US English
CA French
US Spanish
Technical Data Sheet (TDS)
US English
Sell Sheet
US English

E6000® Craft Adhesives

FREQUENTLY ASKED QUESTIONS (FAQs)

What temperature range does E6000 withstand?
Amazing E6000 can be applied in temperatures ranging from 50 °F to 90 °F (10 °C to 32 °C). When cured, E6000 can withstand temperatures between -40 °F and 150 °F (-40 °C and 66 °C).

Is E6000 UV resistant?
Cured E6000 may be painted over for maximum UV resistance. Clear E6000 is not formulated for exposure to sunlight.

Can E6000 be used on Styrofoam™?
No. E6000 is also not recommended for use on any polystyrene, polyethylene or polypropylene plastics.

Will E6000 crack or break under stress?
E6000 dries to a rubber-like consistency that is flexible and moves with adhered material.

Is E6000 washer/dryer safe?
Yes. E6000 will hold on substrates applied to fabrics that are put through the washer and dryer. Dry cleaning, however, is not recommended as dry cleaning solvents break down cured adhesive.

Is E6000 safe for photographs?
Yes. E6000 is photograph-safe and acid-free after a full cure of 24 and 72 hours at 70 °F (21 °C).

How long does E6000 take to dry?
E6000 starts getting tacky in approximately 2 minutes and begins setting in approximately 10 minutes. A full cure takes between 24 and 72 hours.

Remember, temperature and humidity will affect dry time. To speed drying, apply heat using a handheld dryer set on low. Do not hold directly on E6000.

What is used to clean up uncured E6000?
Small amounts of acetone or naphtha for uncured E6000. Cured Amazing E6000 may be removed by cutting and scraping.

What are E6000 warranty specifications?
LIMITED WARRANTY: The product is warranted against any defect in materials or workmanship, providing a claim is made in writing within 180 days after the sale of the product. THE EXCLUSIVE REMEDY FOR ANY DEFECTS IN MATERIALS OR WORKMANSHIP SHALL BE OBLIGATION OF THE SELLER TO REPAIR OR REPLACE ANY PRODUCT WHICH SHALL BE DETERMINED, TO THE SATISFACTION OF SELLER UPON SELLER'S EXAMINATION, TO HAVE BEEN THUS DEFECTIVE.

SELLER MAKES NO EXPRESS OR IMPLIED WARRANTIES OF ANY KIND, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR ANY PARTICULAR PURPOSE OTHER THAN STATED HEREIN. THE REMEDIES PROVIDED HEREIN ARE THE EXCLUSIVE REMEDIES TO BUYER, AND SELLER SHALL NOT BE LIBEL FOR ANY LOSS, INJURY, OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM FAILURE OF THE PRODUCT OR ANY DEFECT IN THE PRODUCT SOLD HEREUNDER, OR ANY DELAY IN PERFORMANCE BY SELLER, NOR WILL SELLER BE LIABLE FOR DIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR ECONOMIC DAMAGES OF ANY KIND, OR FOR CONTRIBUTION OR INDEMNITY CLAIMS, HOWEVER CAUSED, WHETHER FOR BREACH OF WARRANTY, CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, OR OTHERWISE.

Find out more:
E6000 Craft Adhesive
How To Use (Directions)
E6000 2oz image