EcoGlue® Green Solutions™
Extreme Premium Adhesive & Sealant
Environmentally Friendly Without Sacrificing Strength
Multiple Applications
Provides Maximum Performance
Want to purchase this product?
Click on me to buy!
- Make sure surfaces are clean and free of dirt, oil
or debris. - Clean contaminated surfaces with alcohol, not petroleum
based solvents. - A quality caulking gun is recommended to ensure ease
of application. - Best when used above 30°F (-1°C)
- Cut cartridge tip to desired size at a 45° angle, and
puncture foil seal with nail. - Begin gunning to bond surfaces and assemble, making
sure bonded materials are tightly joined. - Use mechanical fasteners as needed or dry tool the
sealant to create a strong mechanical bond against
the joint faces. - NOTE: Application specific instructions provided on
Technical Data Sheet.
Curing
EcoGlue Extreme has instant grab, typically skins over
within 35 minutes, and cures completely in 3 to 7 days
depending upon temperature, humidity and thickness.
Lower temperatures and humidity prolong cure time.
Higher temperatures accelerate cure time.
Cleanup
Wet sealant can be removed using a solvent such as alcohol or soap and water. Cured product can be removed by abrading or scraping the substrate.
Storage
Store in original unopened containers and in a cool dry area. Protect container from heat and direct sunlight. Elevated temperatures will reduce shelf life.
Find out more:
EcoGlue Green Solutions Extreme Premium Adhesive
Technical Data Sheet
MSDS
Sell Sheet
