Checkout the other E-6000 products:
E-6000®
E-6100®
 Amazing E-6000® Craft
Link goes to craft section
|
Industrial Strength Adhesives
UV-6800® UV Resistant Formula. Clear UV-6800 maintains
all of the superior properties of E-6000 and enhances it with
UV stabilizers, which provide ultraviolet resistance for marine
and outdoor applications. UV-6800 may be used as an adhesive on
fiberglass, concrete, metal, glass and wood, including teak. UV-6800 is an excellent insulator against water,
corrosion from salt spray, mildew, bacteria, most chemicals and vibration. UV-6800 maintains its adhesive
strength even when submerged under water. For complete UV resistance, paint over UV-6800.
Advantages
- UV resistant Can be used in outdoor or marine applications and resists yellowing or cracking
- Flammability: NONE, this product is non-flammable.
- Flexible: Does not become brittle in cold weather;
can bond items subject to vibration.
- Chemical resistant: Safe for applications exposed
to dilute acids and dilute caustics.
- Abrasion resistant: Great for bonding objects
subject to normal wear.
- Waterproof: Can be submerged in fresh and salt water
after complete cure.
- Paintable: Paint to match surrounding area.
- Applications
- Marine & Feet Maintenance
- › As a sealant, UV-6800 is an excellent insulator against water,
corrosion from salt spray, mildew, bacteria most chemicals and
vibration
- › Marine applications
- › Apply UV-6800 as a contact adhesive; when cured,
it may be used below the water line
- › Coat dock lines
- › Repair fishing nets and floats
- › Seal wooden deck seams
- › Seal windshields against moisture
- › Mend rubber floor mats and weather-stripping
- › And Much More!
Substrate Choices
| Brick, Ceramic, Marble, Tile (porous) |
Canvas, Fabric, Leather, Vinyl (porous) |
Concrete
(porous) |
Glass, Fiberlass (non-porous) |
Aluminum, Brass, Iron, Steel
(non-porous) |
Acrylic, Polycarbonate, PVC
(non-porous) |
Rubber (SBR)
(porous) |
Wood, Composite Board (porous) |
| NOTE: There are many more substrates E-6000 series of adhesives can bond too, be sure to test before use. |
Properties
| UNCURED MATERIAL |
CURED MATERIAL |
Solids: 30% by weight
Density: 11.1 lbs./gal.
VOC: 1.198 grams/liter
Tack time: 5 minutes
Full cure time: thin film: 24 hours;
thick film: 48-72 hours
Storage: store between 50 °F
(10 °C) and 80 °F (27 °C)
Freeze/thaw stability: yes;
allow product to reach room
temperature before opening
Color: clear
Viscosity: 100,000 cps
Shelf life: 2 years, unopened |
Hardness: 80A
Tensile strength:3,500 lb/in2
(ASTM D-412)
Elongation: 900% (ASTM D-412)
Chemical resistance: excellent to
water, dilute acids & bases
Temperature range: -40 °F
(-40 °C) to 150 °F (66 °C)
Paint-over time: 24 hours
UV resistance: to maximize
UV resistance, paint over
Dielectric strength: 400 V/mil
(ASTM D-149) |
Find out more:
How to use E-6000 Series Adhesives
Frequently Asked Questions (FAQs)
Technical Data Sheet (TDS)
Buy Online
|
